Bosch Rexroth | 4WE6J6XEG24N9DK25LB10V-AN
4WE6J6X/EG24N9DK25L/B10V AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK25L/B10V AN directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and is intended to shift flow paths in hydraulic automation circuits. It handles a maximum operating pressure of 350 bar on ports P, A, and B, while a direct flow rating of 80 l/min suits medium-capacity power units. The subplate interface follows the ANSI B93.9 (AN) porting pattern for straightforward mounting. A 1.0 mm throttle insert in the P port moderates inlet flow to reduce shock. FKM sealing elements maintain leakage control when exposed to modern hydraulic oils. The enclosure reaches the IP65 protection class so the valve can operate in environments with airborne dust or water spray. System oil must be filtered to ISO 4406 class 20/18/15 to preserve spool accuracy and service life.
Electromagnetic actuation is provided by two 24 V DC coils that draw a rated current of 1.25 A, and their windings meet insulation class F so continuous service is possible. Coil surface temperature is permitted up to 120 °C before derating is required. The DK25L five-pole connector furnishes the electrical interface, permitting rapid coil exchange during maintenance. A concealed N9 manual override lets technicians shift the spool without power when troubleshooting. Tank port back pressure may reach 210 bar during normal duty, but manual override operation must be limited to 50 bar to protect the push pins. The assembled valve with both solenoids weighs 1.95 kg, aiding installation by a single installer. These electrical and mechanical limits define safe integration within mobile or industrial hydraulic manifolds.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Max Surface Temp
120 C
Coil Rated Current
1.25 A
Coil Voltage
24 V DC
Electrical Connection
DK25L (5-pole)
Insulation Class (dc)
F
Manual Override Type
N9 (Concealed)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Override Max Tank Pressure
50 bar
Porting Pattern
ANSI B93.9 (AN)
Protection Class
IP65
Seal Material
FKM (V)
Throttle Insert P Ø
1.0 mm
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
