Bosch Rexroth | 4WE6J6XEG24N9DK25LB10V
4WE6J6X/EG24N9DK25L/B10V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK25L/B10V directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series and is intended to route hydraulic flow for automated motion control. It uses nominal size 6 passages to fit compact subplates, and its port layout follows ISO 4401-03-02-0-05 so manifolds can be assembled without adapters. A 24 V DC coil energizes the solenoid, drawing a rated current of 1.25 A and a nominal power of 30 W during operation. Electrical hookup is made through a 5-pole Mini-Change connector marked DK25L, allowing quick disconnection in mobile or modular equipment. The coil can remain powered continuously because the duty cycle is 100 %, avoiding forced cooling intervals. An IP65 enclosure rating protects the unit against dust ingress and low-pressure water jets typically found in plant wash-down areas. The assembled valve weighs 1.95 kg, which keeps installation straightforward for a single technician.
The hydraulic section withstands a maximum operating pressure of 350 bar at ports P, A, and B, making it suitable for high-pressure actuator circuits. It carries up to 80 l/min of flow when driven by a direct-current coil, supporting medium-capacity power packs. Return port T tolerates 210 bar, so back-pressure filters can be used without exceeding the housing limit. A concealed manual override identified as N9 lets maintenance personnel shift the spool mechanically, and this override remains safe up to 50 bar at the tank line. FKM seal material resists heat and aggressive fluids, extending service life with synthetic or bio-based oils. A throttle insert drilled to Ø 1.0 mm in port B moderates pilot flow to reduce switching shock and noise. These combined characteristics equip the valve for precise, reliable direction control in compact hydraulic power units and servo-actuated automation cells.
Technical Specifications
Duty Cycle
100%
Electrical Connection
5-Pole Mini-Change (DK25L)
Manual Override Max Tank Pressure
50 bar
Manual Override Type
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (t)
210 bar (DC)
Nominal Power
30 W
Nominal Size
6
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current
1.25 A
Seal Material
FKM
Throttle Insert
Port B Ø 1.0 mm
Weight
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
