Bosch Rexroth | 4WE6J6XEG24N9DK25L262
4WE6J6X/EG24N9DK25L2/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK25L2/62 valve is produced by Bosch Rexroth in the WE Directional Spool Valves series and directs hydraulic flow in automated equipment. The coil is designed for a nominal voltage of 24 V DC so it can be driven by common machine controls, and a voltage tolerance of ±10 % keeps the solenoid stable when supply levels fluctuate. A nominal power draw of 30 W limits electrical consumption for cabinet power budgeting, while a 100 % ED duty cycle prevents overheating during continuous operation. The valve can change state up to 4.2 times per second, a switching frequency suited to rapid positioning cycles. Connection is through a DK25L five-pole plug that simplifies wiring, and the enclosure carries an IP65 rating to block dust and water jets in factory environments. With two solenoids installed the assembly weighs 1.95 kg, light enough for manifold mounting without additional support.
Hydraulic performance is defined by a maximum pressure of 350 bar on ports P, A, and B, enabling use in high-force circuits, while the tank port tolerates up to 210 bar to protect return lines from pressure spikes. A rated flow capacity of 80 l/min supplies adequate volume for medium-size actuators. The porting pattern follows ISO 4401-03-02-0-05, allowing direct installation on standardized subplates, and a concealed manual override identified as N9 lets maintenance personnel shift the spool without energizing the coil. The solenoid winding may reach a surface temperature of 120 °C under continuous load, so surrounding components must be selected accordingly. Positioning on the manifold is aided by an ISO 8752-3x8-St locating hole that aligns the body during assembly.
Technical Specifications
Coil Surface Temp Max
120 °C
Duty Cycle
100% ED
Electrical Connector
DK25L (5‑pole)
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Switching Frequency
4.2 1/s
Max Tank Port Pressure (t)
210 bar
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
