Bosch Rexroth | 4WE6J6XEG24N9DK25B25
4WE6J6X/EG24N9DK25/B25
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK25/B25 valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. It shifts hydraulic flow paths in industrial automation systems with a wet-pin, detachable coil solenoid that simplifies replacement when service is required. The solenoid is energized by a nominal 24 V DC supply, draws 1.25 A, and absorbs 30 W, so actuation force remains stable under full load. A duty cycle of 100 % ED allows continuous energization without overheating, while the coil surface may reach up to 120 °C before thermal limits are met. Voltage variations of ±10 % are acceptable, preventing nuisance trips during supply fluctuations. Incoming power is routed through a DK25 five-pole Brad Harrison connector, and a concealed N9 manual override lets technicians shift the spool locally when electrical power is unavailable.
The hydraulic section passes up to 80 l/min through the spool when ports p, a, and b are held to a maximum of 350 bar, providing adequate flow for medium-capacity circuits without excessive pressure drop. The tank port tolerates 210 bar during return flow, ensuring safe depressurization in back-pressure conditions. Installation follows ISO 4401-03-02-0-05 with an NFPA D03 size, so the valve mounts directly on standard subplates used in compact manifolds. A throttle insert in port P with a 2.5 mm orifice restricts inrush velocity, protecting downstream components during rapid shifts. Total weight with two solenoids is 1.95 kg, allowing a single technician to install or replace the unit without lifting equipment.
Technical Specifications
Coil Surface Temperature Max
120 °C
Duty Cycle
100% ED
Electrical Connector
DK25 (5-Pole Brad Harrison)
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Mounting Interface
ISO 4401-03-02-0-05
Nfpa Mounting Size
D03
Nominal Power
30 W
Nominal Voltage
24 V DC
Rated Current (24 V Dc)
1.25 A
Solenoid Type
Wet-Pin, Detachable Coil (E)
Tank Port Max Pressure (t)
210 bar (DC)
Throttle Insert
Port P Ø2.5 mm (/B25)
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
