Bosch Rexroth | 4WE6J6XEG24N9DK24LV62-AN
4WE6J6X/EG24N9DK24L/V/62 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L/V/62 AN directional spool valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series and is intended to switch hydraulic flow paths in automated circuits. It employs a J-coded spool to direct oil between pressure, service, and tank lines, while a maximum flow rate of 80 l/min permits its use on medium-capacity actuators. The body withstands operating pressures up to 350 bar, and the tank port is limited to 210 bar to protect return plumbing. Installation follows the ISO 4401-03-02-0-05 (D03) mounting pattern so it aligns with common subplates, and port faces comply with the ANSI B93.9 layout to match North American manifold blocks. FKM seals resist high-temperature fluids and aggressive additives, and a concealed manual override marked N9 lets maintenance staff shift the spool without energizing the solenoid during service.
The valve is energized by a 24 V DC coil that draws 1.25 A at nominal conditions, translating to 30 W of power for consistent magnetic force. Continuous service is possible because the coil is rated for a 100 percent duty cycle, eliminating the need for cool-down periods in cyclic machinery. An M12×1 four-pole connector designated DK24L provides quick electrical hookup and supports field-replaceable cord sets. The housing carries an IP65 rating, blocking dust and low-pressure water jets so the unit can be mounted near fluid reservoirs. Switching commands may be issued up to 4.2 times per second, allowing rapid actuation in servo-controlled presses or handling equipment. With both solenoids installed the assembly weighs 1.95 kg, a mass light enough for manifold plates that rely on threaded mounting holes rather than support brackets.
Technical Specifications
Connector Type
M12x1 4-Pole (DK24L)
Duty Cycle
100% ED
Enclosure Protection
IP65
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure
350 bar
Max Switching Frequency
4.2 1/s
Mounting Pattern
ISO 4401-03-02-0-05 (D03)
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Rated Current
1.25 A
Seal Material
FKM
Spool Symbol
J
Tank Port Max Pressure (dc)
210 bar
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
