Bosch Rexroth | 4WE6J6XEG24N9DK24LV-AN
4WE6J6X/EG24N9DK24L/V AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L/V AN valve belongs to Bosch Rexroth’s WE Directional Spool Valves series and serves as an electrically actuated element for hydraulic automation. A 24 V DC coil drives the spool and draws 1.25 A, allowing direct connection to common control-system power supplies. The actuator absorbs 30 W at nominal load, limiting power consumption while still providing the force needed for rapid shifting. A 100 percent duty cycle supports continuous energizing, and the coil surface may reach 120 °C without degrading insulation, which is useful in tightly packed manifolds. Electrical wiring terminates on an M12 × 1 four-pole connector for quick, vibration-resistant hookup. The unit is classified as protection class III under VDE 0580, keeping internal voltages within the safety extra-low-voltage range, and an IP65 housing blocks dust and water jets once the mating plug is secured, extending service life in harsh production cells.
The hydraulic stage accommodates up to 80 L/min, permitting medium-flow circuits to operate without excessive restriction. Working ports P, A, and B tolerate 350 bar, enabling use in high-pressure systems, while the tank port withstands 210 bar during peak return surges. Installation follows the ISO 4401-03-02-0-05 subplate footprint, which matches NFPA D03, so the valve fits directly on industry-standard manifolds. FKM seals confine a wide range of hydraulic fluids and resist elevated temperatures, supporting long maintenance intervals. A concealed manual override lets technicians shift the spool during setup yet prevents inadvertent operation in service. Oil entering the valve must meet ISO 4406 20/18/15 cleanliness to protect close spool clearances and preserve switching accuracy. Collectively, these hydraulic limits, mounting details, and material choices provide reliable directional control for automated presses, machine tools, and molding equipment.
Technical Specifications
Coil Voltage
24 V DC
Connector Type
M12x1, 4-pole
Duty Cycle
100% ED
Enclosure Ip Rating
IP65
Fluid Cleanliness Class
ISO 4406 20/18/15
Manual Override Type
Concealed
Max Coil Surface Temperature
120 °C
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Tank Pressure (t, Dc)
210 bar
Mounting Pattern
ISO 4401-03-02-0-05
Nfpa Mounting
D03
Nominal Power (dc)
30 W
Protection Class (vde 0580)
III
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM
1620 Old Apex Road
Shipping & Payment Options
