Bosch Rexroth | 4WE6J6XEG24N9DK24LB10-AN
4WE6J6X/EG24N9DK24L/B10 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L/B10 AN directional spool valve belongs to the WE Directional Spool Valves series and is produced by Bosch Rexroth to control flow direction in hydraulic automation circuits. It follows porting pattern ISO 4401-03-02-0-05 so it mounts directly to standard NG6 sub-plates without adapters. The coil is rated for 24 V DC and draws 1.25 A, enabling control from common machine power rails. Electrical consumption of 30 W ensures consistent magnetic force while limiting power dissipation. A duty cycle of 100 % (S1) allows the solenoid to remain energized continuously during closed-loop operation. Internal passages accommodate up to 80 l/min flow, while ports p, a, and b tolerate 350 bar, supporting medium-pressure, medium-flow actuators. The envelope meets IP65, giving protection against dust ingress and water jets in industrial environments.
A concealed N9 manual override lets maintenance personnel shift the spool manually during setup without exposing moving parts. The M12x1 four-pole connector provides a quick-disconnect interface for power and diagnostics, reducing wiring time. Coil surface temperature may reach 120 °C under DC operation, so the housing should be mounted where ambient heat can dissipate. The valve can change state up to 4.2 times per second on direct current, defining the maximum cycling rate in automated sequences. When the solenoid is de-energized, internal suppression keeps switch-off overvoltage below 500 V, safeguarding driver transistors. The tank port withstands 210 bar, which prevents damage when back-pressure builds in return lines. With two solenoids the assembly weighs 1.95 kg, allowing single-person installation on machine manifolds.
Technical Specifications
Connector Type
M12x1 4-Pole
Duty Cycle
100% (S1)
Manual Override
N9 (Concealed)
Max Coil Surface Temperature
120 °C (DC)
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency (dc)
4.2 1/s
Max Tank Port Pressure (t)
210 bar (DC)
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (ip)
IP65
Rated Current (24 V Dc)
1.25 A
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
