Bosch Rexroth | 4WE6J6XEG24N9DK24L2B10VSO43A-1791
4WE6J6X/EG24N9DK24L2/B10VSO43A-1791
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L2/B10VSO43A-1791 directional spool valve is manufactured by Bosch Rexroth for the WE Directional Spool Valves series and routes hydraulic oil between pump supply, actuator ports, and tank in automated equipment. It is built to the nominal size 6 standard so that it fits compact manifolds without excess mass. The mounting interface follows ISO 4401-03-02-0-05, allowing direct installation on matching subplates. A 24 V DC coil energizes the spool, and the design draws a rated current of 1.25 A, which keeps control cabinet fuse ratings low. Nominal power consumption is 30 W, enabling continuous energization because the duty cycle is 100 percent. Wiring is completed through an M12 × 1 four-pole connector that supports quick exchange of field cables. With two solenoids installed the assembly weighs 1.95 kg, so a single technician can mount it during machine maintenance.
The valve tolerates system loads well; working ports P, A, and B accept pressures up to 350 bar, while the T port to tank is limited to 210 bar during direct-current operation, ensuring safe return flow. A maximum flow of 80 l/min can pass through the spool without excessive pressure loss, matching medium-capacity pumps. The enclosure carries an IP65 rating, so dust ingress and water jets do not impair the coil. FKM seals resist aggressive hydraulic fluids and elevated temperatures, extending service life. A concealed N9 manual override lets technicians shift the spool during commissioning, and it can be actuated at tank back-pressure up to 50 bar without damage. For circuits that need damping, a 1.0 mm throttle insert is located in port P to smooth rapid flow changes and reduce hydraulic shock.
Technical Specifications
Duty Cycle
100%
Electrical Connection
M12x1 4-Pole
Ingress Protection
IP65
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Pressure (p/a/b)
350 bar
Max Pressure (t, Dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power (dc)
30 W
Nominal Size
6
Nominal Voltage
24 V DC
Rated Current (24 V)
1.25 A
Seal Material
FKM
Throttle Insert
P (1.0 mm)
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
