Bosch Rexroth | 4WE6J6XEG24N9DK24L262-CSA
4WE6J6X/EG24N9DK24L2/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L2/62 CSA directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and serves to shift hydraulic flow paths in automated machinery. It operates at a nominal voltage of 24 V DC so that the solenoid coil can be powered directly from standard control supplies, and a ±10 % voltage tolerance keeps performance stable when the supply varies. A nominal power draw of 30 W defines the electrical load placed on the control circuit, while a 100 % duty cycle (S1) lets the coil remain energized continuously without thermal derating. The wet-pin, detachable coil solenoid design permits rapid replacement and allows hydraulic fluid to cool the magnetic core. An M12×1 four-pin connector (DK24L) provides a sealed plug-in electrical interface for quick field wiring. The IP65 enclosure rating blocks dust and water jets encountered near production lines, and insulation class III under VDE 0580 establishes the coil’s electrical safety margin.
The hydraulic side of the valve withstands 350 bar on ports p, a, and b so it can be installed in high-pressure supply lines, while the tank and case-drain ports are limited to 210 bar to protect return plumbing. A maximum flow rate of 80 l/min keeps pressure drop within design limits for D03 subplates. The mounting interface follows NFPA T3.5.1 R2-2002 D03, allowing direct installation on standardized manifolds, and a locating hole sized ISO 8752-3×8-St positions the body precisely during assembly. A concealed manual override (N9) lets maintenance staff shift the spool mechanically when electrical power is unavailable without exposing moving parts during normal service. The valve weighs 1.95 kg with two solenoids fitted, a factor to consider when sizing support brackets and manifold studs.
Technical Specifications
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-pin (DK24L)
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Operating Pressure (p,a,b)
350 bar
Max Tank Port Pressure (t, Dc)
210 bar
Maximum Flow (dc)
80 l/min
Mounting Interface
NFPA T3.5.1 R2-2002 D03
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Protection Class (en 60529)
IP65
Protection Class (vde 0580)
III
Solenoid Type
Wet-Pin, Detachable Coil
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
