Bosch Rexroth | 4WE6J6XEG24N9DK24L262
4WE6J6X/EG24N9DK24L2/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L2/62 valve is produced by Bosch Rexroth and belongs to the WE Directional Spool Valves series. It shifts a spool to direct pressure and return lines in hydraulic automation circuits. The unit operates from a 24 V DC supply; the solenoid draws 1.25 A and requires 30 W of nominal power when energized. A 100 percent duty cycle allows the coil to remain powered continuously without thermal derating, and its external surface may reach 120 °C during steady operation. Electrical hookup is through an M12x1 four-pole connector that simplifies plug-and-play wiring inside control enclosures. The housing carries an IP65 rating, blocking dust and low-pressure water jets encountered on industrial machinery. With both solenoids installed the assembly weighs 1.95 kg, making single-person handling practical. To protect spool lands and bushings, hydraulic oil cleanliness must conform to ISO 4406 class 20/18/15 before entering the valve body.
For flow control, the valve passes up to 80 l/min in direct-current service while maintaining stable spool position. System pressure at ports P, A, and B can reach 350 bar, and the tank port safely accommodates 210 bar when decelerating actuators. Installation is on a subplate that follows the ISO 4401-03-02-0-05 interface and corresponds to the NFPA T3.5.1 R2-2002 D03 pattern, so it interchanges with standard D03 manifolds. A concealed N9 manual override lets maintenance personnel shift the spool mechanically during commissioning or if electrical power is lost. Functional safety is supported by a mean time to dangerous failure of 300 years, reducing the likelihood of uncommanded flow paths over the machine’s life. These hydraulic capabilities, mechanical interfaces, and safety provisions make the 4WE6J6X/EG24N9DK24L2/62 a dependable element for machine tools, presses, and other industrial equipment that require precise directional control.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Coil Max Surface Temperature
120 °C
Duty Cycle
100%
Electrical Connection
M12x1 4-Pole
Enclosure Rating
IP65
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Tank Port Pressure (t)
210 bar (DC)
Mounting Interface
ISO 4401-03-02-0-05
Mttfd
300 Years
Nfpa Interface
NFPA T3.5.1 R2-2002 D03
Nominal Power
30 W
Nominal Voltage
24 V DC
Rated Current (24 V Dc)
1.25 A
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
