Bosch Rexroth | 4WE6J6XEG24N9DK24L-CSA
4WE6J6X/EG24N9DK24L CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L CSA directional spool valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. Designed to switch hydraulic paths in automated machinery, it runs on a nominal voltage of 24 V DC, and the coil draws a rated current of 1.25 A, which fits control panels that supply regulated low-voltage power. A nominal power demand of 30 W defines the electrical load that must be provided by the driver card. The valve is specified for a 100 % S1 duty cycle, allowing the solenoid to remain energized continuously. Insulation class F is applied to the windings to tolerate higher thermal stress during long shifts, while a maximum coil surface temperature of 120 °C marks the upper operating boundary. An M12×1 four-pole connector serves as the electrical interface to speed installation, and the ISO 4401-03-02-0-05 porting pattern aligns the body with standard NG6 subplates.
The hydraulic section withstands a maximum operating pressure of 350 bar at ports p, A, and B, enabling use on high-pressure supply lines, whereas the tank port tolerates up to 210 bar to secure the return circuit. A maximum flow of 80 l/min defines the throughput that can be routed without excessive pressure drop. The solenoid can switch up to 4.2 cycles per second, providing sufficient frequency for moderate duty positioning tasks, and a permitted switch-off overvoltage of 500 V indicates the level of transient suppression required in the control circuit. An IP65 enclosure rating protects internal parts against dust and low-pressure water jets for reliable operation on exposed machinery. A concealed manual override, coded N9, allows emergency actuation without reducing the sealing class. Finally, the assembly weighs 1.95 kg with two solenoids, which assists in sizing mounting brackets and considering load limits on the manifold.
Technical Specifications
Duty Cycle
100% (S1)
Electrical Connection
M12x1 4-pole
Ingress Protection
IP65
Insulation Class (dc)
F
Manual Override
Concealed (N9)
Max Coil Surface Temperature
120 °C
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency (dc)
4.2 1/s
Max Tank Port Pressure (t, Dc)
210 bar
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (24 V)
1.25 A
Valve Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
