Bosch Rexroth | 4WE6J6XEG24N9DK24L
4WE6J6X/EG24N9DK24L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DK24L directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and serves to route hydraulic flow in automated equipment. It works from a nominal voltage of 24 V DC so common control power supplies can drive the solenoid directly. A rated current of 1.25 A defines fuse sizing and conductor cross-section. The coil draws 30 W of nominal power, establishing the continuous electrical load. Voltage tolerance of ±10 % keeps performance stable during minor supply deviations. An M12×1 four-pole connector identified as DK24L provides quick electrical coupling. The coil withstands a switch-off overvoltage of 500 V, protecting upstream drivers. An IP65 housing resists dust and water jets encountered on factory floors, while VDE protection class III verifies insulation appropriate for extra-low-voltage circuits.
The hydraulic section handles a maximum operating pressure of 350 bar at ports P, A, and B, permitting use in high-pressure systems. Maximum flow reaches 80 l/min, allowing medium-capacity actuators without excessive pressure loss. The tank port tolerates 210 bar when powered by direct current, preventing damage from elevated back pressure. A switching frequency limit of 4.2 cycles per second supports moderate actuation rates without overheating. The porting pattern follows ISO 4401-03-02-0-05, ensuring compatibility with standard subplates. Cleanliness class ISO 4406 20/18/15 stipulates the fluid purity required to maintain spool reliability. A 100 % S1 duty rating lets the valve remain energized continuously. A concealed manual override labeled N9 enables manual shifting during service while avoiding accidental actuation.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% (S1)
Electrical Connector
M12x1, 4-Pole (DK24L)
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency
4.2 1/s
Max Tank Port Pressure (t)
210 bar (DC)
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65 (DIN EN 60529)
Rated Current (24 V)
1.25 A
Vde Protection Class
III (VDE 0580)
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
