Bosch Rexroth | 4WE6J6XEG24N9DALV
4WE6J6X/EG24N9DAL/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DAL/V directional spool valve is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. It shifts flow paths in hydraulic automation circuits and mounts to subplates that follow the ISO 4401-03-02-0-05 porting pattern. The unit tolerates ambient temperatures up to 50 °C, so it can be installed near power units or inside machine frames. A 24 V DC supply energizes each solenoid, drawing 1.25 A and therefore absorbing 30 W during steady operation. Because the duty cycle is specified at 100 percent, the coil may remain powered continuously without loss of performance. The winding surface is allowed to reach 120 °C, enabling reliable service under elevated oil temperatures and limited air flow. Housing seals and electrical parts are protected to IP65, blocking dust ingress and low-pressure water jets during wash-down maintenance. With both solenoids fitted, the valve weighs 1.95 kg, permitting straightforward handling during assembly.
System performance centers on a maximum operating pressure of 350 bar at ports P, A, and B, while the tank port withstands up to 210 bar to accommodate counter pressure in return lines. A peak flow rate of 80 l/min supports medium-capacity actuators without excessive pressure drop. The FKM seal set endures hydraulic fluid temperatures as high as 80 °C and resists common synthetic or mineral oils. Clean operation is promoted by a required oil cleanliness level of ISO 4406 (c) 20/18/15, which minimizes spool wear and sticking. Electrical wiring is routed through a 1/2-14 NPT cable gland, offering a familiar thread for armored conduit in industrial panels. Together these specifications ensure consistent switching accuracy and long service life within automated hydraulic systems.
Technical Specifications
Ambient Max Temperature (fkm)
50 C
Cable Gland Thread
1/2-14 NPT
Cleanliness Class
ISO 4406 (c) 20/18/15
Coil Max Surface Temperature
120 C
Duty Cycle (ed)
100%
Hydraulic Fluid Max Temp (fkm)
80 C
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Tank Port Pressure (t, Dc)
210 bar
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
