4WE6J6X/EG24N9DAL/N12/62

The 4WE6J6X/EG24N9DAL/N12/62 directional spool valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It shifts flow paths in hydraulic automation circuits to start, stop, or reverse actuator movement without mechanical linkage. The NG6 size allows installation on standard D03 subplates, and the ISO 4401-03-02-0-05 porting pattern aligns the pressure, tank, and work ports for quick stack mounting. A 24 V DC solenoid coil energizes the valve; at this voltage the device draws a rated current of 1.25 A and consumes 30 W, enabling direct drive from common machine controllers. Continuous operation is supported by a 100 % ED duty cycle, so the coil may remain powered indefinitely without overheating. Control cabinets can tolerate supply variation because the coil accepts a ±10 % voltage band. Moisture and dust are resisted by an IP65 housing, and wiring is completed through a 1/2-14 NPT conduit entry that follows the DAL code. A concealed N9 manual override is included for local movement of the spool during setup or testing.

When energized with direct current, the valve routes up to 80 l/min of hydraulic oil while holding line pressure to 350 bar on ports P, A, and B, which suits medium-pressure presses and tooling actuators. The tank port tolerates 210 bar, preserving casing integrity during back-pressure events. A 1.2 mm throttle insert in ports A and B moderates flow to reduce shock at spool transition and damp pressure peaks. Precise alignment on the manifold is maintained with an ISO 8752-3 × 8-St locating pin, simplifying service replacement. The unit weighs 1.95 kg with two solenoids installed, so a single technician can mount or remove it without lifting aids. These mechanical characteristics combine with the electrical performance discussed earlier to provide stable motion control in automated hydraulic stages that require predictable flow and pressure behavior. These integrated functions also reduce the need for separate flow restrictors or check valves, simplifying circuit layouts in modular manifolds.