Bosch Rexroth | 4WE6J6XEG24N9DAB12V62
4WE6J6X/EG24N9DA/B12V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N9DA/B12V/62 directional spool valve is built by Bosch Rexroth and belongs to the WE Directional Spool Valves series. It directs pressurized oil to selected actuator ports inside hydraulic automation systems. The valve is supplied in size 6, giving it a nominal mounting footprint for subplate assemblies. A duty cycle of 100 % allows the solenoid to remain energized continuously without performance loss during extended machine cycles. The coil is designed for a nominal voltage of 24 V DC; when that voltage is applied it draws 1.25 A, resulting in a nominal power demand of 30 W that controllers must provide. The maximum permitted coil surface temperature is 120 °C, so cabinet cooling must keep the winding below this limit. A total weight of 1.95 kg for the two-solenoid version influences manifold support requirements. Hydraulic connections follow the ISO 4401-03-02-0-05 porting pattern, which lets the unit fit standard CETOP 03 subplates without adapter blocks.
Positioning and fastening are aided by a locating hole and ISO 8752-3 × 8 spring pin that keep the body centered on the subplate. A concealed manual override is fitted so maintenance personnel can shift the spool when electrical power is absent while still protecting the push button from accidental activation. The valve can switch up to 4.2 times per second under direct current, giving adequate response for medium-speed positioning tasks. Internal galleries accommodate a continuous flow of 80 l/min, and the service, supply, and bypass ports withstand operating pressures up to 350 bar. The tank port is rated lower, with a maximum of 210 bar, so return line components must be sized accordingly. A 1.2 mm throttle insert in port P restricts inlet flow to stabilize actuation speeds. Fluid sealing relies on FKM elastomers, enabling use with higher-temperature oils and many synthetic hydraulic fluids.
Technical Specifications
Duty Cycle
100% ED
Locating Hole And Pin
ISO 8752-3x8
Manual Override
Concealed
Max Coil Surface Temperature
120 °C
Max Switching Frequency (dc)
4.2 1/s
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (a/b/p)
350 bar
Maximum Tank Port Pressure (t, Dc)
210 bar
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM
Size
6
Throttle Insert (port P)
1.2 mm
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
