4WE6J6X/EG24N5K4/V

The 4WE6J6X/EG24N5K4/V is manufactured by Bosch Rexroth within the WE Directional Spool Valves series. It directs hydraulic flow in automated machinery where electrical signals must quickly shift oil paths. A wet-pin high-power solenoid acts as the driving element so the unit can tolerate fluid contact while producing consistent magnetic force. The coil is rated at 30 W; this power level allows rapid response without excessive heat generation. Designed for 24 V DC service, the coil draws a steady 1.25 A during energized periods. A duty cycle of 100 percent permits continuous holding in positioning tasks that keep actuators clamped or cylinders balanced. When electrical control is unavailable, an N5 lockable mushroom manual override gives maintenance staff a direct means to move the spool. Mounting is straightforward because the body follows the NFPA T3.5.1 D03 interface, and the nominal size 6 envelope keeps port centers compatible with compact D03 subplates.

With direct-current excitation the valve accommodates a maximum flow of 80 l/min, allowing medium-capacity circuits to operate without undue pressure loss. Pressure limits reach 350 bar on ports P, A, and B so high-force actuators can be supplied, while the return line may see up to 210 bar at port T without damaging the housing. The solenoid enclosure is sealed to IP65 (K4), protecting the coil from dust and water jets encountered on mobile or wash-down equipment. FKM sealing elements retain elasticity in hot, chemically aggressive hydraulic oils, extending service intervals. The porting pattern matches ISO 4401-03-02-0-05, ensuring interchangeability with manifold blocks that adhere to this worldwide standard. Despite the performance figures, the assembly weighs only 1.95 kg, simplifying handling during installation or replacement in stacked valve banks.