Bosch Rexroth | 4WE6J6XEG24N4K4
4WE6J6X/EG24N4K4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N4K4 directional spool valve is built by Bosch Rexroth for the WE Directional Spool Valves series and serves to route pressurized oil to actuators or to tank within hydraulic automation loops. With a nominal size of 6, it mounts on NG6 interfaces, and its ISO 4401-03-02-0-05 porting pattern lines up with D03 subplates for interchangeability. Actuation is driven by a high-power wet-pin solenoid whose coil is rated for 24 V DC; steady pull-in force is achieved at 1.25 A so response remains repeatable during cycling. Electrical terminations are made through a DIN EN 175301-803 K4 connector, allowing quick removal for maintenance. Engineers can place the valve in any installation position because internal lubrication is independent of orientation. An IP65 ingress rating keeps the enclosure sealed against dust and low-pressure water jets encountered on mobile or factory equipment.
An NBR seal set contains fluid at the manifold interface and resists standard hydraulic oils. The clamping length of 42 mm limits stack depth where multiple valves share a common bar manifold. Flow capacity reaches 80 l/min in direct-current service, enough to feed medium-sized cylinders without excessive pressure drop. The pressure boundary supports 350 bar at the P, A, and B ports, while the tank port endures 210 bar so return surges do not compromise integrity. A small lockable mushroom manual override lets technicians shift the spool during setup or in the event of power loss, provided tank pressure stays under 50 bar when the override is engaged. With a mean time to dangerous failure of 300 years, the valve offers extended service life for safety-relevant motion control channels.
Technical Specifications
Clamping Length
42 mm
Coil Voltage
24 V DC
Electrical Connection
DIN EN 175301-803 (K4)
Ingress Protection
IP65
Installation Position
Any
Manual Override Tank Limit
50 bar
Manual Override Type
Lockable Mushroom (Small)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Mttfd
300 Years
Nominal Size
6 (NG6)
Porting Pattern
ISO 4401-03-02-0-05 (D03)
Rated Current (24 V Dc)
1.25 A
Seal Material
NBR
Solenoid Type
High-Power Wet-Pin
1620 Old Apex Road
Shipping & Payment Options
