Bosch Rexroth | 4WE6J6XEG24N2K4
4WE6J6X/EG24N2K4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24N2K4 valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth for switching flow paths in automated hydraulic circuits. Its ISO 4401-03-02-0-05 mounting interface fits standard NG6 subplates, simplifying manifold design. The coil operates at 24 V DC, drawing a rated current of 1.25 A, so power supplies can be sized accurately. A nominal coil power of 30 W defines the electrical load under continuous duty. Class F insulation on the coil windings withstands higher internal temperatures, while a 100 % ED duty rating allows the solenoid to remain energized without cooldown. The permissible coil surface temperature reaches 120 °C before derating is needed. Electrical connection is through a DIN EN 175301-803 K4 plug, and an IP65 enclosure rating keeps dust and low-pressure water jets from entering the solenoid housing.
Hydraulic capacity is set by a maximum flow of 80 l/min, making the valve suitable for medium-sized actuators. Ports p, a, and b may be pressurized up to 350 bar, whereas the tank port t is limited to 210 bar to protect return lines. A small mushroom-style manual override lets technicians shift the spool during commissioning or in the event of power loss. Because the installation position is unrestricted, the valve can be oriented to match piping layout. NBR sealing elements resist common mineral oils and maintain leakage control across the rated pressure range. The assembly with two solenoids weighs 1.95 kg, light enough for direct mounting on compact manifolds yet rigid enough to tolerate pulsating loads encountered in industrial machinery.
Technical Specifications
Coil Insulation Class
Class F (DC)
Connector Type
DIN EN 175301-803 (K4)
Duty Cycle
100% ED (S1)
Installation Position
Any
Manual Override
Mushroom Button (Small)
Max Coil Surface Temperature
120 °C
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Tank Port Pressure (t, Dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power (dc Coil)
30 W
Nominal Voltage
24 V DC
Protection Class (k4)
IP65
Rated Current (24 V Dc)
1.25 A
Seal Material
NBR
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
