Bosch Rexroth | 4WE6J6XEG24K4QRABG24E
4WE6J6X/EG24K4QRABG24E
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG24K4QRABG24E valve is produced by Bosch Rexroth and belongs to the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated machinery. The valve is built in size 6 and uses the ISO 4401-03-02-0-05 mounting pattern to fit standard subplates. An NFPA interface coded T3.5.1 R2-2002 D03 provides compatibility with North American manifolds. Electrical actuation is supplied by a high-power wet-pin solenoid that is energized at a nominal 24 V DC and draws 1.25 A during operation. The K4 plug to DIN EN 175301-803 serves as the electrical connection, and inductive QR sensors on positions a and b enable position monitoring for closed-loop control. The unit can be installed in any orientation, simplifying manifold layouts.
The housing carries an IP65 ingress protection rating so sealed enclosures are not required in wash-down zones. Hydraulic channels accept a maximum operating pressure of 350 bar on ports P, A, and B, while port T is limited to 210 bar during direct current switching. Continuous flow up to 80 l/min can pass through the spool without exceeding the rated pressure drop. A cleanliness class of 20/18/15 per ISO 4406 must be maintained to prevent wear. Functional safety is supported by an MTTFd of 300 years, indicating very low probability of dangerous failure. With both solenoids installed, the valve weighs 1.95 kg, which eases manual handling during service.
Technical Specifications
Cleanliness Class (iso 4406)
20/18/15
Electrical Connection
K4 (DIN EN 175301-803)
Ingress Protection
IP65
Installation Position
Any
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (p, A, B)
350 bar
Maximum Port T Pressure (dc)
210 bar
Mounting Pattern
ISO 4401-03-02-0-05
Mttfd
300 years
Nfpa Interface
T3.5.1 R2-2002 D03
Nominal Voltage
24 V DC
Position Monitoring
Inductive QR (a & b)
Rated Current (24 V Dc)
1.25 A
Size
6
Solenoid Type
High-Power Wet-Pin
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
