1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com
You will get an email confirming we have received your inquiry.
A team member will review your request and be in touch concerning any questions or specifications.
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG12NDAL/V directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs flow in hydraulic automation circuits. It follows the ISO 4401-03-02-0-05 porting pattern so it mates with standard size 03 subplates. Electrical entry is provided through a 1/2"-14 NPT cable gland, and the solenoid operates on a rated 12 V DC supply that draws 2.5 A. A voltage tolerance of ±10% allows the coil to remain functional during line fluctuations, while the 30 W nominal power defines its steady heat load. Continuous service is supported by a 100% S1 duty cycle, and the coil surface may reach up to 120 °C without exceeding design limits.
The valve withstands 350 bar on ports a, b, and p, and 210 bar on port t and the de-compression port, ensuring reliable control in high-pressure and return lines. It conducts as much as 80 l/min of hydraulic fluid, and its dynamic response is bounded by a 45 ms maximum energizing time and a 25 ms maximum de-energizing time. An IP65 enclosure rating protects the assembly against dust ingress and water jets when the connector is installed correctly. FKM seals resist common hydraulic oils, while the required oil cleanliness of ISO 4406 20/18/15 helps prevent silting and wear inside the spool bore.
Cable Gland Thread
1/2"-14 NPT
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% (S1)
Max Coil Surface Temperature
120 °C
Max Off Switching Time
25 ms
Max On Switching Time
45 ms
Max Operating Pressure (a/b/p)
350 bar
Max Operating Pressure (t, Dc)
210 bar
Maximum Flow (dc)
80 l/min
Nominal Power
30 W
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (dal)
IP65
Rated Current
2.5 A
Rated Voltage
12 V DC
Seal Material
FKM
Voltage Tolerance
±10%
Worldwide Shipping with FedEx and UPS.
We accept all major credit cards
1 year Hydraulic Parts USA warranty on ALL products
We are a Better Business Bureau A+ business