Bosch Rexroth | 4WE6J6XEG12N9DALB1062-CSA
4WE6J6X/EG12N9DAL/B10/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG12N9DAL/B10/62 CSA valve is part of the WE Directional Spool Valves series from Bosch Rexroth and directs pressurized oil to actuators in mobile and industrial hydraulic systems. It is produced in nominal size 6 for compact circuits, and its mounting interface follows NFPA T3.5.1 R2-2002 D03 so it attaches directly to common subplates. The porting pattern matches ISO 4401-03-02-0-05, streamlining manifold machining. A wet-pin, high-power solenoid supplies the shifting force, and its coil is rated for 12 V DC with a continuous draw of 2.5 A, letting machines powered by low-voltage electrical networks drive the valve. Power enters through a DAL 1/2-14 NPT connector that offers straightforward field wiring. With both solenoids in place the unit weighs 1.95 kg, allowing installation without external supports.
The valve handles flows up to 80 l/min while maintaining stable spool positioning. Ports A, B, and P tolerate operating pressures to 350 bar, and the tank port remains secure up to 210 bar, covering the majority of high-duty mobile circuits. A throttle insert with a Ø 1.0 mm orifice in port P moderates flow surges to reduce shock when functions start or stop. The housing is sealed to IP65, so dust and low-pressure water do not compromise solenoid integrity. A concealed manual override (code N9) permits emergency actuation yet stays protected against unintended use. Accurate alignment on the subplate is ensured by an ISO 8752-3×8 locking pin that fits the locating hole. The coil circuit withstands up to 500 V of switch-off overvoltage, preserving insulation when inductive energy is released.
Technical Specifications
Coil Voltage
12 V DC
Electrical Connection
DAL 1/2-14 NPT
Ingress Protection
IP65
Locating Hole
ISO 8752-3x8 Locking Pin
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (t, Dc)
210 bar
Mounting Interface
NFPA T3.5.1 R2-2002 D03
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (12 V)
2.5 A
Solenoid Type
Wet-Pin, High-Power
Throttle Insert
Port P Ø 1.0 mm (B10)
Weight
1.95 kg (two solenoids)
1620 Old Apex Road
Shipping & Payment Options
