Bosch Rexroth | 4WE6J6XEG12N9DALB10-CSA
4WE6J6X/EG12N9DAL/B10 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG12N9DAL/B10 CSA directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It shifts hydraulic flow between ports in automated machinery and mobile equipment. The unit is built around the NG6 size 6 format, corresponding to NFPA D03 mounting, and follows the ISO 4401-03-02-0-05 port pattern so it mates with common subplates. Electrical actuation is supplied at 12 V DC; at this voltage the coil draws a rated current of 2.5 A and consumes 30 W of power. Continuous operation is permitted because the duty cycle is 100 %. Wiring enters through a 1/2"-14 NPT cable gland, and a concealed manual override allows local actuation when power is absent.
Environmental protection is provided by an IP65 enclosure, so the valve withstands dust and low-pressure water jets in typical plant locations. In direct current service it handles up to 80 l/min while sustaining 350 bar on pressure, A, and B lines, and 210 bar on the tank port. A 1.0 mm throttle insert is fitted in port P to stabilize flow during rapid spool shifts. The coil surface may reach 120 °C without damage, reflecting thermal limits of the insulation system. These parameters define reliable service in hydraulic control loops that demand compact installation and consistent switching performance.
Technical Specifications
Cable Gland Thread
1/2"-14 NPT
Duty Cycle
100%
Ip Rating
IP65
Manual Override
Concealed
Max Coil Surface Temp
120 °C
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Nfpa Size
D03
Nominal Power
30 W
Nominal Size
NG6 (Size 6)
Nominal Voltage
12 V DC
Port Pattern
ISO 4401-03-02-0-05
Rated Current (12 V Dc)
2.5 A
Throttle Insert (port P)
1.0 mm
1620 Old Apex Road
Shipping & Payment Options
