4WE6J6X/EG110N9K4/B08V

The 4WE6J6X/EG110N9K4/B08V valve belongs to the WE Directional Spool Valves series and is manufactured by Bosch Rexroth. It is used to shift hydraulic flow paths in automated machinery. The solenoid is designed for a coil voltage of 110 V DC and draws a rated current of 0.25 A to achieve the demanded actuation force. With a nominal power draw of 30 W and a continuous duty cycle of 100 % (S1), the coil can remain energized without thermal derating. Class F insulation supports these electrical figures while protecting the winding against elevated service temperatures. The maximum coil surface temperature is limited to 120 °C to maintain insulation integrity and prevent damage to adjacent components. Electrical termination is accomplished through a DIN EN 175301-803, 3-pole (2+PE) connector, allowing standard plug-in wiring in control manifolds. The mounting face follows the ISO 4401-03-02-0-05 porting pattern so the valve fits common CETOP 3 subplates in compact hydraulic stacks.

The hydraulic section permits a maximum continuous flow of 80 l/min, providing adequate capacity for medium-size cylinders and motors. Working ports A, B, and P are rated for 350 bar, while the T port withstands 210 bar, enabling the valve to operate in high-pressure circuits without external relief devices. A concealed manual override labeled N9 lets maintenance personnel shift the spool when power is absent, and this feature is limited to 50 bar tank pressure to avoid seal damage. FKM seals resist mineral oils and many synthetic fluids, sustaining reliability at elevated temperatures. The envelope is protected to IP65 so sprayed water and dust do not impair the solenoid or spool assembly when the connector is correctly installed. A fixed throttle orifice of 0.8 mm in port P moderates acceleration by restricting inrush flow at the supply line. Together these parameters produce a valve suitable for precise, robust control tasks in automated hydraulic equipment.