Bosch Rexroth | 4WE6J6XEG110N9DALB10V
4WE6J6X/EG110N9DAL/B10V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6J6X/EG110N9DAL/B10V valve is manufactured by Bosch Rexroth for the WE Directional Spool Valves series. It shifts hydraulic flow between ports to automate cylinders and motors in compact machinery. The unit is built in size 6, so it fits manifolds designed for small to mid-range circuits. Its mounting face follows the ISO 4401-03-02-0-05 porting pattern, enabling direct installation on standard subplates. The pressure lines p, a, and b may reach 350 bar, and the spool still seals reliably. A maximum flow of 80 l/min can pass through without exceeding rated performance. Electrically, the solenoid is designed for a nominal 110 V DC supply that draws 0.25 A under normal conditions. The coil accepts a ±10 percent voltage variation so control cabinets do not require tightly regulated power supplies.
Power consumption is limited to 30 W, allowing the solenoid to remain energized for extended periods without overheating because the duty cycle is specified at 100 percent ED. The electrical circuit meets Class I protection requirements, meaning a protective earth conductor must be connected. The enclosure achieves an IP65 rating, so internal components stay protected from dust and water jet exposure. Wiring is routed through a 1/2-14 NPT cable gland, simplifying conduit selection in the field. When the manual override is used, return flow must remain below 50 bar to avoid damaging the mechanism, while the t port can operate continuously up to 210 bar during normal service. With both solenoids fitted, the assembly weighs 1.95 kg, which eases handling during block mounting.
Technical Specifications
Cable Gland Thread
1/2-14 NPT
Coil Power (dc)
30 W
Duty Cycle
100% ED
Electrical Protection Class
Class I
Ingress Protection
IP65
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Tank Pressure (t, Dc)
210 bar
Nominal Current (110 V Dc)
0.25 A
Nominal Voltage
110 V DC
Porting Pattern
ISO 4401-03-02-0-05
Valve Size
6
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
