Bosch Rexroth | 4WE6HB6XEG24N9DK24L62
4WE6HB6X/EG24N9DK24L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6HB6X/EG24N9DK24L/62 directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and is intended to route pressurized oil to actuators in automated hydraulic machinery. It uses a 24 V DC coil that draws 1.25 A, letting control panels power the valve from standard low-voltage supplies. The coil’s nominal power of 30 W limits heat buildup, while a 100 % duty cycle allows continuous energization without pause. Class F insulation further safeguards the winding against the temperature rise associated with long-term holding. A ±10 % voltage tolerance keeps shifting performance stable when the supply fluctuates. Wiring is completed through an M12 × 1 four-pole connector coded DK24L, and the assembled unit carries an IP65 rating that shields internal parts from dust and water spray.
The hydraulic end of the valve is rated for 350 bar on pressure and service ports P, A, and B, with the tank port accommodating 210 bar, making the unit suitable for high-pressure circuits. Flow paths permit up to 80 l/min, supplying ample oil volume to cylinders or motors. Proper operation requires oil cleanliness of ISO 4406 20/18/15 to curb abrasive wear on the spool. A concealed manual override (N9) lets technicians shift the spool by hand when electrical power is absent, provided tank pressure does not exceed 50 bar. Mounting follows ISO 4401-03-02-0-05, and a locating pin conforming to ISO 8752-3 × 8 (/62) centers the body during installation to prevent misalignment. These mechanical provisions, combined with the electrical and thermal characteristics described earlier, complete the valve’s profile for reliable service in manifold or subplate assemblies.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
M12x1 4-Pole (DK24L)
Fluid Cleanliness Class
ISO 4406 20/18/15
Insulation Class (dc Coil)
F
Locating Hole And Pin
ISO 8752-3x8 (/62)
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (t, Dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Nominal Power (dc Coil)
30 W
Nominal Voltage
24 V DC
Protection Class (assembled)
IP65
Rated Current (24 V Dc)
1.25 A
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
