Bosch Rexroth | 4WE6HB6XEG24N9DK24L262
4WE6HB6X/EG24N9DK24L2/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6HB6X/EG24N9DK24L2/62 directional valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It regulates hydraulic flow in automated machinery through an H spool in position B, which establishes the required flow paths between pressure, actuator, and tank lines. The wet-pin detachable coil solenoid operates on a nominal voltage of 24 V DC and draws 1.25 A to deliver 30 W of magnetizing power during shifts. A 100 percent duty cycle permits continuous energization without thermal derating, and a concealed manual override lets maintenance staff shift the spool when power is unavailable. Electrical connection is made through a centrally located M12 × 1 four-pole plug, providing a compact interface for control wiring.
When installed on a manifold, the valve follows porting pattern ISO 4401-03-02-0-05 and matches the NFPA D03 interface for alignment with common subplates. A locating hole and ISO 8752-3 × 8-St locking pin secure the body against movement during high-pressure cycles. The hydraulic section handles a maximum flow of 80 l/min, with ports A, B, and P rated for 350 bar while the tank port tolerates up to 210 bar. Sealing integrity meets IP65, so the enclosure resists dust ingress and water jets in typical production areas. Electronic protection includes a 500 V switch-off overvoltage limit, reducing stress on the coil circuit and associated drivers during de-energization. These characteristics enable dependable operation in closed-loop hydraulic controls where precise delivery and rapid spool shifts are required.
Technical Specifications
Connector Type
M12x1 4-Pole (Central)
Duty Cycle
100% ED
Ingress Protection
IP65
Locating Hole And Locking Pin
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Flow (dc)
80 l/min
Max Operating Pressure (ports A/b/p)
350 bar
Max Switch-off Overvoltage
500 V
Max Tank Port Pressure (dc)
210 bar
Nfpa Mounting Interface
D03
Nominal Power (dc Standard)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (24 V Dc)
1.25 A
Solenoid Type
Wet-Pin, Detachable Coil
Spool Symbol
H (Position B)
1620 Old Apex Road
Shipping & Payment Options
