Bosch Rexroth | 4WE6HA6XEG24N9K4ZV
4WE6HA6X/EG24N9K4/ZV
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6HA6X/EG24N9K4/ZV valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow in automated machinery. It installs on manifolds with the ISO 4401-03-02-0-05 porting pattern, letting designers exchange valves without redrilling subplates. A maximum operating pressure of 350 bar on ports P, A, and B supports high-pressure circuits, while the tank port tolerates 210 bar in direct current use to handle back-pressure conditions. The valve passes up to 80 l/min, so pumps of moderate capacity can be serviced without throttling. An FKM seal set is used to withstand mineral oils and many synthetic fluids, and an IP65 enclosure rating keeps dust and low-pressure water jets away from the electric actuation parts. A clamping length of 22 mm matches standard tie-rod kits for sandwich stacks, and the manual override is concealed to avoid inadvertent shifts during service.
The solenoid coil is designed for a nominal voltage of 24 V DC and draws 1.25 A, giving a nominal power consumption of 30 W that control cabinets can supply continuously because the duty cycle is 100%. Voltage variations of ±10% are accepted, so the coil remains energized without chatter on typical mobile power buses. The DIN EN 175301-803 three-pole connector with protective earth simplifies wiring and seals to the housing. A maximum switching frequency of 4.2 cycles per second allows rapid machine sequencing, and the switch-off overvoltage is limited to 500 V to protect driver electronics from inductive spikes. Finally, the valve withstands this electrical workload because the solenoid can be switched at the stated rate for long periods without overheating.
Technical Specifications
Clamping Length
22 mm
Duty Cycle
100%
Electrical Connector
DIN EN 175301-803, 3-pole (2+PE)
Manual Override
Concealed
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Switch-off Overvoltage
500 V
Max Switching Frequency
4.2 1/s
Max Tank Port Pressure (t)
210 bar (DC)
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (24 V)
1.25 A
Seal Material
FKM
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
