Bosch Rexroth | 4WE6HA6XEG24N9DK35L62SO407-AN
4WE6HA6X/EG24N9DK35L/62SO407 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6HA6X/EG24N9DK35L/62SO407 AN valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow in automation circuits. Its nominal size of 6 fits standardized CETOP 03 manifolds and minimizes pressure drop in compact power units. A porting pattern that follows ANSI B93.9 aligns the interface with North American subplates. The valve works against operating pressures up to 315 bar in the P, A, and B lines, enabling use in high-pressure actuator loops. Tank port pressure is allowed up to 210 bar, so back-pressure at T does not compromise spool positioning. When energized, the DC solenoid draws 1.25 A from a 24 V supply, matching common PLC power rails. Electrical input power is limited to 8 W, reducing heat generation in dense valve banks. Flow capacity reaches 60 l/min in direct-current operation of the SO407 coil, supporting medium-sized cylinder speeds.
Connection to the machine harness is via an M12×1 four-pole plug coded DK35L, simplifying pre-wired installation. Duty cycle is 100 percent S1, so the coil may remain energized continuously without risk of thermal overload. An IP65 housing resists dust and low-pressure water jets, allowing mounting outside electrical enclosures. The device meets protection class III under VDE 0580, meaning it operates on safety extra-low voltage circuits. The coil surface temperature is limited to 85 °C, keeping nearby components within acceptable thermal limits. A maximum switching frequency of two cycles per second supports rapid, repeatable motion sequences without chatter. A concealed manual override identified by code N9 lets maintenance staff shift the spool during commissioning or power loss. A locating hole with an ISO 8752 3×8-St spring pin keeps the body aligned on subplates to prevent port mismatch.
Technical Specifications
Connector Type
M12x1 4-Pole (DK35L)
Duty Cycle
100% (S1)
Enclosure Protection
IP65
Locating Hole And Locking Pin
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Coil Surface Temperature
85 °C
Max Flow (dc, So407)
60 l/min
Max Operating Pressure (p/a/b)
315 bar
Max Switching Frequency (so407)
2 1/s
Max Tank Port Pressure (t, Dc)
210 bar
Nominal Power (so407)
8 W
Nominal Size
6
Porting Pattern
ANSI B93.9
Protection Class (vde 0580)
III
Rated Current (24 V Dc)
1.25 A
Supply Voltage
24 V DC
1620 Old Apex Road
Shipping & Payment Options
