Bosch Rexroth | 4WE6H6XEW110N9K4V62
4WE6H6X/EW110N9K4/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6H6X/EW110N9K4/V/62 directional valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow in automated equipment. It is built in valve size 6, so it fits NG6 manifolds and occupies minimal space in compact power units. The porting pattern follows ISO 4401-03-02-0-05 (NFPA D03), allowing direct mounting on standardized sub-plates without extra adapters. A maximum flow of 60 l/min lets the spool pass sufficient oil for medium-duty actuators, while a maximum operating pressure of 350 bar on ports A, B, and P supports high-pressure circuits. The tank port withstands up to 160 bar so return lines can handle pressure spikes during rapid reversal. FKM seals are used to resist common hydraulic oils and elevated temperatures. The solenoid is rated at 110 V AC for both 50 Hz and 60 Hz networks to simplify international deployment.
Electrical features are chosen to ensure reliable long-term service. Coil insulation class H tolerates high winding temperatures generated by continuous duty. A 100 % ED duty cycle means the solenoid may remain energized without mandatory cooling pauses. Switch-on power of 220 VA provides the magnetic force needed to shift the spool, after which holding power drops to 50 VA to limit heat rise. Rated current draws are 0.52 A at 50 Hz and 0.39 A at 60 Hz, values that guide fuse and relay selection. The connector conforms to DIN EN 175301-803 type K4, and the assembled interface attains IP65 protection so dust and water jets do not disturb operation. A concealed manual override identified by code N9 permits local actuation during commissioning or power loss while preventing accidental use during normal service.
Technical Specifications
Coil Insulation Class
H
Connector Standard
DIN EN 175301-803 (K4)
Duty Cycle
100% ED
Holding Power (ac)
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure (a/b/p)
350 bar
Max Tank Port Pressure (t, Ac)
160 bar
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05 (NFPA D03)
Protection Class (k4)
IP65
Rated Current 50 Hz
0.52 A
Rated Current 60 Hz
0.39 A
Seal Material
FKM
Switch-on Power (ac)
220 VA
Valve Size
6 (NG6)
1620 Old Apex Road
Shipping & Payment Options
