Bosch Rexroth | 4WE6H6XEG96N9K4A1262
4WE6H6X/EG96N9K4/A12/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6H6X/EG96N9K4/A12/62 valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. Designed to route hydraulic flow in automated machinery, it employs a nominal voltage of 96 V DC so it can be driven directly from common DC control buses. A rated current of 0.33 A minimizes heat generation and simplifies power supply sizing. The wet-pin, detachable coil solenoid aids replacement without disturbing hydraulic lines, while a concealed manual override (code N9) allows technicians to shift the spool during commissioning or power loss. Connection is made through a DIN EN 175301-803 K4 plug which standardizes wiring across multiple valve banks. The assembly withstands 350 bar on pressure ports a, b, and p, and 210 bar on the tank port t to suit high-pressure circuits. It passes up to 80 l/min of direct-current flow, supporting medium-capacity actuators in presses, clamping systems, and material handling stations.
Mounting follows the ISO 4401-03-02-0-05 porting pattern, letting the valve drop onto industry-standard D03 subplates without additional adapters. Compliance with NFPA T3.5.1 D03 for the interface guarantees interchangeability with other size-03 components in North American layouts. An IP65 ingress rating protects the coil and core tube from dust and water jets so the unit can be installed on exposed manifolds. The coil surface can reach 120 °C under continuous duty, therefore adjacent components must be spaced to avoid thermal loading. Switch-off overvoltage is limited to 500 V to prevent arcing across relay contacts in the control panel. A locating hole drilled to ISO 8752-3x8-St speeds accurate alignment during assembly, and NBR seals retain hydraulic oil while resisting common mineral-based fluids used in industrial power units.
Technical Specifications
Coil Surface Temp Max
120 °C
Electrical Connector
DIN EN 175301-803 (K4)
Ingress Protection
IP65
Interface Standard
NFPA T3.5.1 D03
Locating Hole
ISO 8752-3x8-St
Manual Override
Concealed (N9)
Max Switch-off Overvoltage
500 V
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (a/b/p)
350 bar
Maximum Tank Port Pressure (t, Dc)
210 bar
Nominal Voltage
96 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current
0.33 A
Seal Material
NBR
Solenoid Type
Wet-Pin, Detachable Coil
1620 Old Apex Road
Shipping & Payment Options
