Bosch Rexroth | 4WE6H6XEG12NDAL62
4WE6H6X/EG12NDAL/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6H6X/EG12NDAL/62 directional spool valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series, and it directs pressurized oil to selected actuator ports in hydraulic automation lines. Its nominal size 6 passageways give a compact footprint while still accommodating typical mobile equipment flows. A mounting pattern of ISO 4401-03-02-0-05 lets the valve bolt directly to standardized subplates so service swaps can be done without line rework. The unit handles up to 80 l/min, providing adequate flow for mid-range cylinders and motors during rapid traverse. A maximum operating pressure of 350 bar on the P, A, and B ports equips the valve for high-force duties such as clamping or lifting. The coil is wound for 12 V DC, enabling operation from vehicle electrical systems, and its ±10 % voltage tolerance keeps shifting reliability when battery levels sag. Continuous energization is permitted by a 100 % ED duty cycle, there is no manual override, and the control circuit must supply 2.5 A to move the spool.
The return line rating reaches 210 bar on port T, allowing back-pressure without jeopardizing spool movement. Electrical load is defined by a nominal power of 30 W, ensuring the control system can size wiring and fusing correctly. The DAL connector uses a 1/2-14 NPT thread and includes a switching indicator, simplifying installation and visual status checks at the manifold. That connector carries an IP65 ingress rating, so dust and low-pressure water jets cannot reach the terminations during field service. The solenoid winding may reach a surface temperature of 120 °C at full duty, a value that guides insulation selection and mounting clearances. Overall mass with two solenoids is 1.95 kg, light enough for direct stack mounting on compact power packs.
Technical Specifications
Coil Voltage
12 V DC
Duty Cycle
100% ED
Electrical Connection
DAL (1/2-14 NPT, indicator)
Ip Rating (electrical Connection)
IP65
Manual Override
N
Max Coil Surface Temperature
120 C
Max Flow (dc)
80 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Tank Port Pressure (t, Dc)
210 bar
Mounting Pattern
ISO 4401-03-02-0-05
Nominal Power (dc)
30 W
Nominal Size
6
Rated Current (12 V Dc)
2.5 A
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
