Bosch Rexroth | 4WE6GA6XOFEG12N9K4T06ZV
4WE6GA6X/OFEG12N9K4/T06ZV
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6GA6X/OFEG12N9K4/T06ZV is produced by Bosch Rexroth within the WE Directional Spool Valves series for routing pressure and return flow in hydraulic automation loops. It uses a 12 V DC solenoid coil so the valve can be driven directly from mobile power networks. The electromagnetic circuit draws a rated current of 2.5 A, and the nominal power demand is 30 W, which helps limit temperature rise in enclosures. Because the duty cycle is 100 % ED, the coil may stay energized continuously without service interruption. A voltage tolerance of ±10 % guards against nuisance drop-outs caused by supply fluctuation. Electrical termination is provided by the K4 connector defined in DIN EN 175301-803, and when this plug is fitted the enclosure achieves IP65 protection against dust ingress and water jets. With both solenoids mounted, the assembly weighs 1.95 kg, allowing a single technician to install the unit onto a manifold plate.
The valve handles a maximum flow of 80 l/min, enabling responsive actuation of medium-size cylinders and motors. Ports P, A, and B withstand operating pressures up to 350 bar, while the tank port is rated for 210 bar, so back-pressure devices can be used without exceeding component limits. FKM seals resist mineral oil and elevated temperature to maintain leakage control over long service intervals. Internal spool play is held to the T06 minimum, reducing bypass leakage when the valve is centered. A 22 mm clamping length secures each coil to the tube to preserve magnetic alignment during vibration. For manual positioning the concealed N9 override can be depressed with a tool, protecting it from accidental activation when the enclosure is open. The interface follows the ISO 4401-03-02-0-05 pattern, allowing direct mounting on standard CETOP 3 base plates used throughout machine automation.
Technical Specifications
Clamping Length
22 mm (Z)
Coil Voltage
12 V DC
Control Spool Play
T06 (Minimum)
Duty Cycle
100% ED
Electrical Connection
K4 (DIN EN 175301-803)
Manual Override
N9 (Concealed)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (dc)
210 bar
Nominal Power
30 W
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (k4)
IP65
Rated Current (12 V)
2.5 A
Seal Material
FKM (V)
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
