Bosch Rexroth | 4WE6GA6XEG24N9DK35L-CSA-AN
4WE6GA6X/EG24N9DK35L CSA AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6GA6X/EG24N9DK35L CSA AN directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs hydraulic flow in automated equipment. It is produced in valve size 6 (NG6/D03), allowing installation on subplates that share this footprint, and it follows the ANSI B93.9 porting pattern so bolt holes and flow paths align with common North-American manifolds. The solenoid is rated for 24 V DC, and a voltage tolerance of ±10 percent lets the coil remain within limits when supply levels fluctuate. During energization the coil draws a nominal current of 1.25 A and dissipates 30 W, figures that simplify power-supply selection. A 100 percent ED duty cycle permits continuous actuation without thermal pauses, while an M12×1 four-pole DK35L connector provides quick electrical hookup. The housing carries an IP65 ingress rating, sealing internal parts against dust and low-pressure water jets during routine washdown.
Hydraulic capability is defined by a maximum operating pressure of 350 bar at ports a, b, and p, whereas the tank port withstands 210 bar to protect return-line components. The valve passes up to 80 l/min, establishing the upper flow limit for circuits that rely on rapid cylinder or motor movement. To prevent spool wear and sticking, supplied fluid must meet ISO 4406 cleanliness class 20/18/15, controlling particulate concentration in service. A concealed N9 manual override lets technicians shift the spool locally for troubleshooting without protruding levers that could snag during operation. Electrical parts meet Protection Class III according to VDE 0580, meaning only safety extra-low voltage is present inside the coil. Functional safety is enhanced by an Mttfd of 300 years, indicating long statistical life before a dangerous failure might occur under normal industrial loads.
Technical Specifications
Duty Cycle
100% ED
Electrical Connector
M12x1 4‑pole (DK35L)
Fluid Cleanliness
ISO 4406 20/18/15
Ingress Protection
IP65
Manual Override
Concealed (N9)
Max Tank Port Pressure (t, Dc)
210 bar
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (a/b/p)
350 bar
Mttfd
300 years
Nominal Current
1.25 A
Nominal Power
30 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9
Protection Class
III (VDE 0580)
Valve Size
6 (NG6/D03)
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
