Bosch Rexroth | 4WE6GA6XEG24N9DK25LV
4WE6GA6X/EG24N9DK25L/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6GA6X/EG24N9DK25L/V valve is produced by Bosch Rexroth for the WE Directional Spool Valves series, where it directs hydraulic flow to cylinders or motors in automated equipment. The unit is built in size 6, which defines the spool area and guides flow for compact power packs. It mounts on an ISO 4401-03-02-0-05 pattern so standard subplates can be used without adapter blocks. Ports P, A, and B withstand up to 350 bar, enabling high-pressure circuit layouts. Both solenoids operate on 24 V DC, and each coil draws a steady 1.25 A for predictable power allocation. Continuous direct-current service allows a maximum flow of 80 l/min, sustaining rapid actuator movement. Electrical power arrives through a 5-pole Mini-Change connector coded DK25L, which supports quick field replacement. With both solenoids fitted the assembly weighs 1.95 kg, so a single technician can install or remove it during routine maintenance.
The valve seats against the manifold over a 42 mm clamping length, keeping the body aligned and the ports sealed. FKM sealing elements resist synthetic and mineral oils, maintaining leak-tight performance under thermal cycling. An IP65 enclosure shields the coils from dust and low-pressure water spray found in wash-down zones. Coil surface temperature may rise to 120 °C under continuous energization, and Class F insulation tolerates this heat without degrading winding integrity. A concealed manual override (code N9) lets service staff shift the spool during setup, while the maneuver is limited to systems where tank pressure stays below 50 bar. The dedicated tank port endures up to 210 bar, supporting circuits that run elevated back-pressure for energy recovery or counterbalance. These construction limits ensure the valve remains reliable in demanding industrial hydraulic automation.
Technical Specifications
Clamping Length
42 mm
Coil Max Surface Temperature
120 °C
Electrical Connection
5-pole Mini-Change (DK25L)
Ingress Protection
IP65
Insulation Class (dc)
F
Manual Override
Concealed (N9)
Manual Override Max Tank Pressure
50 bar
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (t, Dc)
210 bar
Mounting Interface
ISO 4401-03-02-0-05
Rated Current (24 V Dc)
1.25 A
Rated Voltage
24 V DC
Seal Material
FKM
Valve Size
6
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
