Bosch Rexroth | 4WE6GA6XEG24N9DK24L2V62
4WE6GA6X/EG24N9DK24L2/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6GA6X/EG24N9DK24L2/V/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow during automation sequences and is energized by a 24 V DC coil that draws a rated current of 1.25 A. Electrical hookup is through an M12x1 four-pole connector, and the housing meets IP65 to block dust and water jets. The design satisfies electrical protection class III and employs insulation class F materials to tolerate elevated winding temperature. A concealed manual override allows the spool to be shifted without power, while a clamping length of 42 mm fits the standard D03 stack height. With two solenoids the assembly weighs 1.95 kg, supporting straightforward handling during installation.
The hydraulic section supports a maximum flow of 80 l/min, with ports P, A, and B rated for 350 bar and the tank port limited to 210 bar. Mounting follows the ISO 4401-03-02-0-05 porting pattern, and the interface conforms to NFPA T3.5.1 R2-2002 D03 so the valve seats directly on common subplates. A locating hole equipped with a locking pin prevents rotation when side loads act on the body. Sealing is accomplished with FKM elastomers that withstand typical hydraulic media and high temperature. These parameters position the valve for compact manifold assemblies that demand standardized mounting, secure retention, and high-pressure performance.
Technical Specifications
Clamping Length
42 mm
Connector Type
M12x1 4-Pole (DK24L)
Electrical Protection Class
III
Insulation Class (dc)
F
Interface Standard
NFPA T3.5.1 R2-2002 D03
Locating Hole
With Locking Pin (/62)
Manual Override
Concealed (N9)
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (p, A, B)
350 bar
Maximum Tank Port Pressure (dc)
210 bar
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (ip)
IP65
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM (V)
Supply Voltage
24 V DC
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
