Bosch Rexroth | 4WE6GA6XEG24K4QMAG24
4WE6GA6X/EG24K4QMAG24
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6GA6X/EG24K4QMAG24 directional spool valve regulates hydraulic flow in mobile or industrial control circuits. Manufactured by Bosch Rexroth for the WE Directional Spool Valves series, it shifts pressurized oil between ports to start, stop, or change actuator motion. The solenoid coil is rated for 24 V DC and draws 1.25 A, so the control cabinet can power it directly from standard low-voltage supplies. At 30 W nominal power the coil generates manageable heat and, because the duty cycle is 100 percent S1, the valve can remain energized continuously without thermal derating. A maximum switching frequency of 4.2 operations per second supports rapid cycling on presses or material-handling arms. Flow enters through a subplate with the ISO 4401-03-02-0-05 porting pattern, allowing interchange with other CETOP 03 components. The body mounts in any position, which simplifies manifold layout, and passes up to 80 liters per minute while withstanding 350 bar on ports A, B, and P.
Environmental and service limits are defined for reliable plant operation. The K4 connector seals to IP65, so splashed oil or dust does not reach the electrical contacts. Hydraulic cleanliness must not exceed ISO 4406 class 20/18/15 to prevent spool sticking and premature wear. The coil accepts a ±10 percent voltage swing around 24 V, maintaining consistent magnetic force when supply lines drop or surge. Class F insulation prevents winding damage when the surface temperature climbs, and that temperature may reach 120 °C under worst-case ambient and cycling. Backpressure on the return line can rise to 210 bar at port T without causing leakage past dynamic seals. A calculated mttfd of 300 years indicates a very low probability of dangerous failure, supporting functional-safety assessments for machinery that relies on predictable directional control.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Surface Temperature Max
120 °C
Duty Cycle
100% (S1)
Installation Position
Any
Insulation Class (dc)
F
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure
350 bar (ports A, B, P)
Maximum Switching Frequency
4.2 1/s (DC)
Maximum Tank Port Pressure
210 bar (port T, DC)
Mttfd
300 years
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65 (K4 connector)
Rated Current (24 V Dc)
1.25 A
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
