4WE6G6X/EW110N9K4/V/62 CSA

The 4WE6G6X/EW110N9K4/V/62 CSA directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth. Designed to shift hydraulic flow paths in automated machinery, the unit operates on a nominal supply of 110 V AC at 50/60 Hz and draws a rated current of 0.52 A, so circuit protection can be sized accurately. A switch-on power demand of 220 VA delivers rapid magnetic force for fast spool movement, while the holding power falls to 50 VA to limit coil heating during prolonged energization. Continuous cycling is possible because the coil is specified for a 100 % ED duty cycle. The electrical interface follows DIN EN 175301-803 (K4), enabling quick plug-in connection, and the enclosure carries an IP65 rating to block dust and low-pressure water jets in wash-down areas. When de-energized, the winding can tolerate a switch-off overvoltage of up to 500 V, preventing insulation damage caused by inductive transients.

Hydraulic performance is defined by a maximum operating pressure of 350 bar at the A, B, and P ports, allowing the valve to control high-pressure actuators, while the T port withstands 160 bar in AC applications to suit pressurized tank returns. A maximum flow rate of 60 l/min keeps pressure drop within acceptable limits for medium-size circuits. For service situations, a manual override can be used as long as tank pressure does not exceed 50 bar, giving technicians a safe way to reposition the spool. Mounting follows the NFPA D03 pattern, and the porting aligns with ISO 4401-03-02-0-05, so the valve fits widely available subplates and manifolds without adapter plates. FKM seals are fitted to resist mineral oil, synthetic fluids, and elevated temperatures encountered in industrial power units. Together these hydraulic and mechanical limits ensure consistent function when the valve is installed in rigid or mobile automation systems.