Bosch Rexroth | 4WE6G6XEW110N9DK25L62
4WE6G6X/EW110N9DK25L/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EW110N9DK25L/62 valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It changes the direction of hydraulic oil to automate cylinders and motors. The nominal size is 6, so the installation footprint matches standard subplates. A porting pattern of ISO 4401-03-02-0-05 aligns the ports with common manifolds. In the center position P–T is open, letting pump flow return to tank when the valve is not energized. The solenoid coil is rated for 110 V AC at 50 or 60 Hz, and a voltage tolerance of ±10 % absorbs supply fluctuations. Switch-on power reaches 220 VA to overcome initial magnetic reluctance, while holding power drops to 50 VA to limit heat once the spool is shifted. A duty cycle of 100 % ED allows the coil to remain energized continuously without thermal overload.
Actuation can also be performed manually through a concealed N9 override, providing backup control during commissioning or power loss. Electrical connection is made with a DK25L five-pole plug, giving a quick-disconnect interface for field wiring. The enclosure meets IP65, so dust ingress and low-pressure water jets do not impair operation in industrial settings. Maximum pressure for ports P, A, and B is 350 bar, while the tank and pilot ports tolerate 160 bar; these limits define safe circuit design margins. The valve passes a nominal flow of 60 l/min, enough for medium-size actuators without excessive pressure drop. It can switch up to two cycles per second, supporting repetitive machine sequences that need reliable timing. A locating hole sized ISO 8752-3×8 is included to pin the body accurately on the mounting surface, keeping the flow passages aligned under vibration.
Technical Specifications
Center Position
P–T open
Coil Voltage
110 V AC (50/60 Hz)
Duty Cycle
100% ED
Electrical Connector
DK25L (5-pole)
Holding Power
50 VA
Locating Hole
ISO 8752-3x8 (included)
Manual Override
N9 (concealed)
Max Pressure (p, A, B)
350 bar
Max Pressure (t, Ac)
160 bar
Max Switching Frequency (ac)
2 1/s
Nominal Flow (ac)
60 l/min
Nominal Size
6
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Switch-on Power
220 VA
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
