Bosch Rexroth | 4WE6G6XEW110N9DK25L
4WE6G6X/EW110N9DK25L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EW110N9DK25L directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series and is intended to route hydraulic flow for automated actuators. It follows the ISO 4401-03-02-0-05 porting pattern so it fits common subplates used in modular power units. A rated voltage of 110 V AC makes the coil compatible with standard industrial control circuits, while operation on either 50 Hz or 60 Hz allows the same model to be installed worldwide. During energization the coil draws a switch-on power of 220 VA, and the 100 % ED duty cycle permits the valve to stay energized without forced cooling. Hydraulic limits reach 350 bar on pressure, A, and B ports, with the tank port restricted to 160 bar when the coil is supplied by AC, so the unit handles high-pressure work circuits yet protects the return line. A maximum flow rate of 60 l/min defines the throughput that can be directed without excessive pressure loss.
Steady-state electrical demand is 0.52 A at 110 V 50 Hz and 0.39 A at 110 V 60 Hz, values that help size power supplies and protectors. After pull-in the coil maintains position with 50 VA holding power to minimize heat generation during continuous runs. A 5-pole Brad Harrison Mini-Change connector provides a quick-disconnect interface that simplifies wiring changes in maintenance cycles. The housing meets IP65 so internal components remain sealed against dust ingress and water jets common in factory wash-downs. A concealed manual override lets technicians shift the spool during commissioning or power loss without exposing moving parts. The coil surface may reach up to 120 °C, so surrounding materials must withstand that temperature under worst-case duty. With both solenoids installed the assembly weighs 1.95 kg, a factor to consider when mounting the valve on manifolds or mobile equipment.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
5-Pole Brad Harrison Mini-Change
Frequency
50/60 Hz
Holding Power (ac)
50 VA
Manual Override
Concealed
Max Coil Surface Temperature
120 C
Max Flow (ac)
60 l/min
Max Operating Pressure (p,a,b)
350 bar
Max Operating Pressure (t)
160 bar (AC)
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (en 60529)
IP65
Rated Current (110 V 50 Hz)
0.52 A
Rated Current (110 V 60 Hz)
0.39 A
Rated Voltage (ac)
110 V
Switch-on Power (ac)
220 VA
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
