Bosch Rexroth | 4WE6G6XEG96N9K4A1262
4WE6G6X/EG96N9K4/A12/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG96N9K4/A12/62 valve is produced by Bosch Rexroth as part of the WE Directional Spool Valves series and directs hydraulic flow in automation circuits by shifting an electrically actuated spool. The porting pattern follows ISO 4401-03-02-0-05 (D03), so the body fits standard subplates without adapter blocks. A maximum flow of 80 l/min allows the valve to service medium-capacity lines without excessive pressure drop. For pressure limits, ports P, A, and B withstand up to 350 bar, while the tank port is limited to 210 bar in direct current operation. The solenoid operates on a nominal coil voltage of 96 V DC, matching installations that use high-voltage DC supplies. At this voltage the coil draws 0.33 A, which simplifies fuse selection and wiring gauge. Power consumption is 30 W, keeping heat generation moderate during continuous energization. The duty cycle is 100% ED, enabling the spool to remain shifted indefinitely without thermal damage.
Environmental protection is provided by an IP65 enclosure rating, allowing operation in dusty or splash-prone areas when the mating connector is properly sealed. The winding is built to insulation class F, so the coil can tolerate higher thermal stress before breakdown. Electrical hookup uses a DIN EN 175301-803 form K4 connector, which offers quick assembly and standardized pinout. A concealed manual override coded N9 lets technicians shift the spool locally for setup or emergency operation. The override may be used against tank pressures up to 50 bar, preventing damage during manual actuation. Coil surface temperature may reach 120 °C at extreme conditions, a value that guides spacing and insulation inside manifolds. The design limits switch-off overvoltage to 500 V, reducing stress on driver electronics when the magnetic field collapses. A locating hole defined as ISO 8752-3x8-St (/62) assists in precise alignment of the valve on the mounting plate.
Technical Specifications
Coil Rated Current (96 V Dc)
0.33 A
Duty Cycle
100% ED
Electrical Connector
DIN EN 175301-803 (K4)
Enclosure Rating
IP65
Insulation Class (dc)
F
Locating Hole
ISO 8752-3x8-St (/62)
Manual Override
Concealed (N9)
Manual Override Tank Pressure
≤ 50 bar
Max Coil Surface Temp
120 °C
Max Flow (dc)
80 l/min
Max Pressure P/a/b
350 bar
Max Pressure T (dc)
210 bar
Max Switch-off Overvoltage
500 V
Nominal Coil Voltage
96 V DC
Nominal Power (dc)
30 W
Porting Pattern
ISO 4401-03-02-0-05 (D03)
1620 Old Apex Road
Shipping & Payment Options
