Bosch Rexroth | 4WE6G6XEG24N9K4ZV
4WE6G6X/EG24N9K4/ZV
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG24N9K4/ZV is a directional spool valve manufactured by Bosch Rexroth in the WE Directional Spool Valves series, used to route pressurized fluid in automated hydraulic circuits. It follows the ISO 4401-03-02-0-05 porting pattern so it mounts directly on standard CETOP 03 manifolds. A clamping length of 22 mm determines the tie-rod engagement needed for secure installation. Electrical actuation is provided through a DIN EN 175301-803 K4 connector, which simplifies coil replacement and field wiring. The solenoid runs at a rated voltage of 24 V DC and tolerates ±10 % variation to accommodate supply fluctuations; it draws 1.25 A under load, giving a nominal power draw of 30 W that keeps enclosure heat manageable. Continuous energization is possible because the coil is designed for a 100 % duty cycle and built to insulation class F. An IP65 rating protects the housing from dust ingress and low-pressure water jets.
A maximum operating pressure of 350 bar at ports P, A, and B allows the valve to work in high-pressure circuits, while the tank port withstands up to 210 bar without damage. The spool passes up to 80 l/min so it supports moderate flow rates without excessive loss. Fluid cleanliness must remain at ISO 4406 (c) 20/18/15 to prevent wear between the spool and body. FKM seals provide chemical and temperature resistance, maintaining sealing integrity during continuous duty. The assembly weighs 1.95 kg with two solenoids, influencing manifold support requirements during installation.
Technical Specifications
Clamping Length
22 mm
Cleanliness Class
ISO 4406 (c) 20/18/15
Duty Cycle
100% ED
Electrical Connection
DIN EN 175301-803 (K4)
Ingress Protection
IP65
Insulation Class (dc)
F
Max Flow (dc)
80 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Tank Pressure (t, Dc)
210 bar
Nominal Power (dc)
30 W
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (dc)
1.25 A
Rated Voltage (dc)
24 V
Seal Material
FKM
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
