Bosch Rexroth | 4WE6G6XEG24N9K4V62
4WE6G6X/EG24N9K4/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG24N9K4/V/62 valve is manufactured by Bosch Rexroth for the WE Directional Spool Valves series and directs hydraulic flow to actuators in automated machinery. The size 6 envelope determines the port spacing and overall mounting height within compact manifolds. A maximum flow of 80 l/min allows the valve to handle moderate system throughput without excessive pressure drop. Ports A, B, and P tolerate up to 350 bar, while port T is limited to 210 bar to protect the return line. Continuous energization is supported by a 100 percent duty cycle, so the coils may remain powered for long holding periods. The solenoid windings are designed for a nominal 24 V DC supply; a ±10 percent voltage window keeps switching performance stable during minor supply fluctuations. With a rated current of 1.25 A and a power draw of 30 W, heat generation stays within limits for panel-mounted assemblies.
The electrical and mechanical interfaces match NFPA T3.5.1 D03, and the ISO 4401-03-02-0-05 porting pattern aligns the valve with widely used subplates for straightforward replacement. Environmental sealing reaches IP65, so dust ingress and low-pressure water jets do not compromise the solenoids. A concealed manual override designated N9 lets maintenance staff shift the spool without energizing the coil, yet remains hidden during normal service to prevent accidental operation. The circuit is protected against high inductive kickback by a maximum switch-off overvoltage of 500 V, safeguarding driver electronics. FKM seals resist common hydraulic oils and elevated temperatures, extending service life in demanding duty cycles. The assembled unit with two solenoids weighs 1.95 kg, allowing easy installation by one technician without lifting aids.
Technical Specifications
Duty Cycle
100%
Ingress Protection (ip)
IP65
Interface Standard
NFPA T3.5.1 D03
Manual Override
Concealed (N9)
Max Switch-off Overvoltage
500 V
Maximum Flow (dc)
80 l/min
Maximum Operating Pressure (a/b/p)
350 bar
Maximum Pressure Port T (dc)
210 bar
Nominal Power (dc)
30 W
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (24 V Dc)
1.25 A
Seal Material
FKM
Size
6
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
