Bosch Rexroth | 4WE6G6XEG24N9DK24L2SO407-AN
4WE6G6X/EG24N9DK24L2SO407 AN
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG24N9DK24L2SO407 AN valve is manufactured by Bosch Rexroth and belongs to the WE Directional Spool Valves series. It shifts hydraulic flow paths by energizing one of two solenoids, so machine controllers can direct actuators without mechanical linkage. The valve is driven by a nominal voltage of 24 V DC, which fits standard industrial power rails, and it draws a rated current of 1.25 A to develop the required magnetic force. Nominal power is 8 W, limiting heat generation during continuous duty. An M12 × 1 four-pole electrical connector provides quick plug-in wiring, while the IP65 protection class prevents dust ingress and water jets during wash-down. The design supports a 100 % ED duty cycle, enabling uninterrupted holding in any spool position, and the solenoid can switch up to 2 times per second to meet moderate cycling demands. Coil surface temperature is capped at 85 °C so neighboring components are not exposed to excessive heat.
The hydraulic section handles operating pressures up to 315 bar on ports P, A, and B, allowing it to control cylinders and motors in high-pressure circuits, while the T port is limited to 210 bar for safe tank return. Maximum flow of 60 l/min lets the valve serve medium-sized actuators without excessive pressure drop. A porting pattern that follows ANSI B93.9 enables direct mounting on subplates common in North American installations. Ambient temperature can range from –20 °C to +50 °C so the unit functions in outdoor or unconditioned shops, and the hydraulic fluid may be between –20 °C and +80 °C to match most mineral oils or synthetic equivalents. Required fluid cleanliness is ISO 4406 class 20/18/15 to protect the precision spool fit from wear. The assembly weighs 1.95 kg with two solenoids, which eases manual installation and maintenance.
Technical Specifications
Ambient Temperature Range (nbr)
-20 to +50 C
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% ED
Electrical Connector
M12 x 1, 4-pole
Hydraulic Fluid Temperature (nbr)
-20 to +80 C
Max Coil Surface Temperature (so407)
85 C
Max Flow (dc, So407)
60 l/min
Max Operating Pressure (p,a,b)
315 bar (SO407)
Max Operating Pressure (t, Dc)
210 bar
Max Switching Frequency (so407)
2 1/s
Nominal Power (so407)
8 W
Nominal Voltage
24 V DC
Porting Pattern
ANSI B93.9 (AN)
Protection Class
IP65
Rated Current (24 V Dc)
1.25 A
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
