Bosch Rexroth | 4WE6G6XEG24N4K462-CSA
4WE6G6X/EG24N4K4/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG24N4K4/62 CSA directional spool valve is produced by Bosch Rexroth within the WE Directional Spool Valves series. Designed to shift hydraulic flow paths in automated power units, it runs on a 24 V DC coil that draws 1.25 A and consumes 30 W, allowing continuous service at a 100 percent duty cycle without thermal interruption. The coil accepts supply deviations of ±10 percent so control panels can tolerate minor voltage variation. An IP65 housing protects internal parts against dust and low-pressure water, which suits typical plant wash-down areas. The electrical interface is a DIN EN 175301-803 form K4 connector that simplifies field wiring and maintains seal integrity. During constant energization the coil surface may reach 120 °C, so mounting clearances must prevent contact with heat-sensitive components.
For hydraulic performance, the valve handles a maximum operating pressure of 350 bar on ports P, A, and B, while the tank port endures up to 210 bar, enabling use in high-pressure circuits. A direct-current rated flow of 80 L/min provides adequate volume for medium frame actuators, and a switching rate of 4.2 cycles per second supports rapid actuation in sequenced operations. A lockable manual override lets technicians shift the spool during commissioning, with the override rated for 50 bar back-pressure to tank. Assembly alignment is aided by a locating hole that includes a locking pin identified by the /62 suffix, ensuring repeatable installation positions. Together these characteristics align the 4WE6G6X/EG24N4K4/62 CSA valve with demand for reliable, high-cycle hydraulic automation.
Technical Specifications
Duty Cycle
100%
Electrical Connector
DIN EN 175301-803 (K4)
Locating Hole
With locking pin (/62)
Manual Override
Lockable
Manual Override Max Tank Pressure
50 bar
Max Coil Surface Temperature
120 C
Max Flow (dc)
80 L/min
Max Operating Pressure (p,a,b)
350 bar
Max Switching Frequency
4.2 1/s
Max Tank Pressure (t)
210 bar
Nominal Power
30 W
Protection Class
IP65
Rated Current
1.25 A
Rated Voltage
24 V DC
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
