Bosch Rexroth | 4WE6G6XEG24K4QR0G24S
4WE6G6X/EG24K4QR0G24S
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG24K4QR0G24S valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and directs pressure flow in hydraulic automation circuits. Its 4/3-way configuration provides four ports and three discrete operating positions to route supply, work, and return lines as required. A G-type spool establishes the internal flow paths that match common actuator demands. Coil excitation is supplied at a nominal 24 V DC, and each solenoid draws 1.25 A so standard control cabinets can power the unit without oversized supplies. The coils plug into a DIN EN 175301-803 type K4 connector that simplifies field replacement and sealing. To confirm motion, the QR0G24S spool position switch outputs a signal when the element sits in the monitored rest position 0. Direct current operation permits a maximum flow of 80 l/min, allowing medium-size cylinders to cycle quickly while staying below the valve’s throttling limit.
The valve is built on size 6 cavities, a form factor that pairs with compact manifolds yet still tolerates high pressures. It bolts to subplates following the NFPA T3.5.1 R2-2002 D03 mounting pattern, while port locations comply with ISO 4401-03-02-0-05 so manifold design remains interchangeable among manufacturers. Pressure at the P, A, and B lines can reach 350 bar, enabling use in presses, injection molding machines, and other heavy-duty equipment; the T port is rated for 210 bar in direct current service to protect return plumbing. An IP65 enclosure guards the solenoids and switch against dust and low-pressure water jets, supporting installation in wash-down zones. With both coils installed, the assembly weighs 1.95 kg, light enough for stacking multiple sections on a common manifold without excessive structural support.
Technical Specifications
Electrical Connection
DIN EN 175301-803 (K4)
Ip Rating
IP65 (K4)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Tank Port Pressure (t)
210 bar (DC)
Monitored Position
Rest (0)
Mounting Pattern
NFPA T3.5.1 R2-2002 D03
Nominal Current (24 V Dc)
1.25 A
Nominal Voltage
24 V DC
Porting Pattern
ISO 4401-03-02-0-05
Size
6
Spool Position Switch
QR0G24S
Spool Type
G
Way Configuration
4/3-Way
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
