Bosch Rexroth | 4WE6G6XEG12N9DALV62-CSA
4WE6G6X/EG12N9DAL/V/62 CSA
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG12N9DAL/V/62 CSA directional valve is manufactured by Bosch Rexroth as part of the WE Directional Spool Valves series and is applied to switch flow paths in hydraulic automation systems. It is built to nominal size 6, so manifold ports stay compact while still passing the rated flow. The mounting pattern corresponds to ISO 4401-03-02-0-05, allowing direct subplate mounting without adapters. With two solenoids the device weighs 1.95 kg, which simplifies manual installation. An IP65 enclosure protects internal components from dust and water spray that are common in industrial environments. FKM seal material withstands mineral oils and elevated temperature exposure. The hydraulic fluid must meet ISO 4406 cleanliness class 20/18/15 to keep the spool free of abrasive particles. Continuous energization is permitted because the coil is specified for a 100% ED duty cycle.
The valve is energized from a 12 V DC supply where the coil draws a rated current of 2.5 A, and this electrical load produces the nominal power consumption of 30 W. Coil surfaces may reach 120 °C during extended service, so wiring and nearby components must tolerate that temperature. Hydraulic flow up to 80 l/min can pass through the spool when the valve is fully shifted. Working pressure is limited to 350 bar at ports P, A, and B, while port T can return oil at up to 210 bar. A switching frequency of 4.2 cycles per second allows rapid directional changes in servo applications. The manual override can be used when tank pressure does not exceed 50 bar, giving operators a safe means to shift the spool without electrical power.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% ED
Ingress Protection
IP65
Manual Override Max Tank Pressure
50 bar
Max Coil Surface Temperature (dc)
120 C
Max Flow (dc)
80 l/min
Max Pressure (port T, Dc)
210 bar
Max Pressure (ports P/a/b)
350 bar
Max Switching Frequency
4.2 1/s
Mounting Pattern
ISO 4401-03-02-0-05
Nominal Power (dc)
30 W
Nominal Size
6
Nominal Voltage
12 V DC
Rated Current (12 V Dc)
2.5 A
Seal Material
FKM
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
