Bosch Rexroth | 4WE6G6XEG12N9DAL62
4WE6G6X/EG12N9DAL/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6G6X/EG12N9DAL/62 valve belongs to the WE Directional Spool Valves series produced by Bosch Rexroth for hydraulic automation circuits. Its size 6 envelope follows the ISO 4401-03-02-0-05 porting pattern so it mates directly with standard sub-plates. Power reaches the solenoid through a DAL electrical connector with a 1/2-14 NPT thread, simplifying wiring in rigid conduit systems. The coil runs on a nominal 12 VDC supply and remains functional within a ±10 % voltage band, allowing tolerance for battery or supply fluctuations. With a nominal power draw of 30 W and a duty cycle of 100 % ED, the solenoid can stay energized continuously without overheating. A maximum switching frequency of 4.2 cycles per second supports rapid directional changes when the application demands fast response. If electrical actuation is not available, a concealed N9 manual override lets personnel shift the spool locally.
In operation, the valve tolerates line pressures up to 350 bar on ports P, A, and B, while the tank port is limited to 210 bar, matching common return-line ratings. It passes up to 80 liters per minute of hydraulic oil under direct current actuation, making it suitable for medium-flow machinery. An IP65 ingress protection rating shields the coil and terminals against dust and low-pressure water jets when the connector is properly installed. Dynamic sealing is handled by NBR material to maintain compatibility with standard mineral oils. Installation is aided by a locating hole and an ISO 8752-3x8 dowel pin that position the body accurately on the manifold surface. The assembly weighs 1.95 kg with two solenoids, which eases manual handling during service or retrofit tasks.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
DAL (1/2-14 NPT)
Ingress Protection
IP65
Locating Hole And Pin
ISO 8752-3x8
Manual Override
N9 (concealed)
Max Flow (dc)
80 l/min
Max Operating Pressure (p/a/b)
350 bar
Max Switching Frequency
4.2 1/s
Max Tank Port Pressure (dc)
210 bar
Nominal Power
30 W
Nominal Voltage
12 VDC
Porting Pattern
ISO 4401-03-02-0-05
Seal Material
NBR
Size
6
Voltage Tolerance
±10%
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
