Bosch Rexroth | 4WE6F6XEW110N9DAV62
4WE6F6X/EW110N9DA/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6F6X/EW110N9DA/V/62 directional spool valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is used to route hydraulic flow in automation circuits. Its solenoid is designed for a coil voltage of 110 V AC at 50 or 60 Hz so it can be powered directly from common control transformers, with a voltage tolerance of ±10% to handle typical mains variation. A rated current of 0.52 A at 50 Hz and 0.39 A at 60 Hz defines the electrical load presented to the supply, while a duty cycle of 100% ED allows the coil to remain energized continuously without overheating. The thermal limit is reinforced by a coil surface temperature rating of 120 °C and an insulation class H, both of which safeguard the winding during prolonged service. When the valve is first energized it draws 220 VA of switch-on power to shift the spool, then settles to 50 VA of holding power to minimize energy consumption once the position is reached.
The hydraulic section is built around a size 6 body that supports a maximum flow of 60 l/min for medium-capacity circuits. Working ports A, B, and P can withstand pressures up to 350 bar, while the tank port is limited to 160 bar, ensuring the housing and seals operate within safe limits. An FKM seal set is fitted to resist common hydraulic oils and elevated temperatures. The porting pattern follows ISO 4401-03-02-0-05, allowing direct mounting to standardized sub-plates without additional adapters. A concealed manual override identified as N9 is included so technicians can shift the spool during commissioning or power loss without exposing moving parts. These characteristics combine to provide reliable directional control in automated hydraulic machinery.
Technical Specifications
Coil Surface Temperature (ac)
120 °C
Coil Voltage
110 V AC (50/60 Hz)
Duty Cycle
100% ED
Holding Power (ac)
50 VA
Insulation Class (ac)
H
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Pressure (ports A/b/p)
350 bar
Porting Pattern
ISO 4401-03-02-0-05
Rated Current (50 Hz)
0.52 A
Rated Current (60 Hz)
0.39 A
Seal Material
FKM
Switch-on Power (ac)
220 VA
Tank Port Max Pressure (ac)
160 bar
Valve Size
6
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
