Bosch Rexroth | 4WE6F6XEW110N9DALV62
4WE6F6X/EW110N9DAL/V/62
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6F6X/EW110N9DAL/V/62 directional spool valve is produced by Bosch Rexroth for the WE Directional Spool Valves series. It directs hydraulic flow to actuators in automated circuits. The solenoid coil is specified for 110 V at 50 or 60 Hz, allowing direct operation from standard control transformers. When energized, the coil draws a switch-on power of 220 VA to shift the spool and then maintains position with a holding power of 50 VA to limit heat generation. Continuous service is supported by a 100 % duty cycle so the valve can stay energized without cool-down periods. At 110 V and 50 Hz the coil draws 0.52 A, while at 60 Hz it requires 0.39 A, data that helps size upstream power supplies. Voltage may vary within ±10 % without affecting operation, and an H-class insulation system withstands the resulting thermal stress.
For hydraulic performance, the valve tolerates a maximum operating pressure of 350 bar in pressure ports, enabling use in high-pressure machinery. Flow capacity reaches 60 L/min when driven by AC coils, which determines the actuator speed that can be achieved. Port T is limited to 160 bar so back-pressure lines must conform to this rating. The body mounts on an NFPA T3.5.1 D03 interface and follows the ISO 4401-03-02-0-05 porting pattern, ensuring interchangeability with common subplates. Wiring enters through a 1/2-14 NPT conduit connection labeled DAL, simplifying field installation. An IP65 protection class blocks dust and low-pressure water jets, enabling placement in typical plant environments, and FKM seals resist mineral oils and synthetic fluids to maintain leakage integrity.
Technical Specifications
Coil Voltage
110 V (50/60 Hz)
Duty Cycle
100% ED
Electrical Connection
1/2-14 NPT (DAL)
Holding Power
50 VA
Insulation Class (ac Coil)
H
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Max Pressure Port T (ac)
160 bar
Mounting Interface
NFPA T3.5.1 D03
Porting Pattern
ISO 4401-03-02-0-05
Protection Class
IP65
Rated Current (110 V 50 Hz)
0.52 A
Rated Current (110 V 60 Hz)
0.39 A
Seal Material
FKM
Switch-on Power
220 VA
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
