Bosch Rexroth | 4WE6EB6XOFEW110N9K4
4WE6EB6X/OFEW110N9K4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WE6EB6X/OFEW110N9K4 valve belongs to the WE Directional Spool Valves series from Bosch Rexroth and is used to shift hydraulic flow between circuits in automated systems. It employs a wet-pin solenoid with a detachable coil so maintenance crews can replace the coil without opening the hydraulic envelope. The coil is energized by a 110 V AC supply at 50 or 60 Hz, drawing 220 VA during switch-on to create the initial magnetic force and then 50 VA in holding mode to limit temperature rise. Continuous operation is possible because the solenoid is rated for a 100 percent duty cycle, and the design supports a switching frequency of up to 2 Hz for repetitive control tasks. A concealed manual override, identified by the N9 code, lets technicians shift the spool during setup, while a DIN EN 175301-803 K4 connector provides the electrical interface for field wiring.
The hydraulic section withstands a maximum operating pressure of 350 bar on the service ports and 160 bar on the return port, enabling use in medium-pressure circuits. It accommodates flows up to 60 l/min, matching common pump outputs for machinery actuation. Subplate mounting follows the ISO 4401-03-02-0-05 port pattern so the valve can drop directly onto NG6 (CETOP 03) manifolds without adapters. When the K4 connector is sealed, the enclosure achieves an IP65 protection class, preventing dust ingress and low-pressure water jets inside control cabinets. Fluid cleanliness must not exceed ISO 4406 20/18/15 to keep the spool lands free of abrasive wear. With two solenoids installed the assembly weighs 1.95 kg, allowing easy handling during manifold service.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Duty Cycle
100% ED
Electrical Connection
DIN EN 175301-803 (K4)
Holding Power (ac)
50 VA
Manual Override
Concealed (N9)
Max Flow (ac)
60 l/min
Max Operating Pressure
350 bar
Max Port T Pressure (ac)
160 bar
Max Switching Frequency (ac)
2 Hz
Nominal Voltage
110 V AC (50/60 Hz)
Porting Pattern
ISO 4401-03-02-0-05
Protection Class (k4)
IP65
Solenoid Type
Wet-Pin, Detachable Coil
Switch-on Power (ac)
220 VA
Weight (two Solenoids)
1.95 kg
1620 Old Apex Road
Shipping & Payment Options
